Gas Conditioner

Gas Conditioner

$17.49 USD

Designed to increase the lubricity and improve combustion of gasoline fuels resulting in improved fuel efficiency.Compatible with All Types of Oil.



  • Reduced exhaust emissions
  • Oxygenates fuel for more complete combustion
  • Better mileage and lower octane requirement
  • Cleans and lubricates carburetor, injectors, and top end
  • Minimizes pre-ignition
  • Increases lubricity of fuel
  • Reduces moisture related problems in the fuel system
  • Increases fuel efficiency and combustion
  • Reduces gelling point and inhibits fungal growth
  • Protects pumps and injectors

Bi-Tron Gas Conditioner is a complex combination of petroleum-based chemicals that are designed to increase the lubricity and improve combustion of gasoline fuel. The active components penetrate and remove carbon build-up, gums and sludge and lubricate the moving metal parts of both the fuel supply system and the engine’s top-end. The product is compatible with all types and grades of gasoline fuel. Use of the Bi-Tron Gas Conditioner extends the life of the engine and improves the efficiency of fuel combustion, thereby reducing fuel consumption.

Bi-Tron Gas Conditioner, while not acting simply as an octane booster, does improve the structure of the combustion, increasing the amount of available oxygen in the fuel itself; therefore increasing the amount of energy obtained from every drop. This means that when the fuel burns, oxygen has already been introduced into the chemical makeup of the fuel and becomes a key component of it. The net result is that the fuel ignites and burns faster, hotter and more completely, so that more of the energy is released from the fuel. In terms of emissions this means that the carbon monoxide and hydrocarbon levels will most likely be dramatically reduced.

If your fuel is burning more completely, more energy is being released. Combine this with our other products, and less energy is being used to overcome friction and drag, so more energy will reach the wheels. If you drive exactly the same way after adding Bi-Tron as you did before, and your car is well tuned, you should get more mileage. Try not to use the extra power. Try to be conscious of accelerating more evenly and anticipate breaking sooner and more gradually to maximize your fuel economy.


Use 1 to 2 ounces of Bi-Tron Gas Conditioner for every 10 gallons (30 to 60 ml for every 44 Liters) of fuel. For example, a 20 gallon tank would need 2 to 4 ounces (60-120ml) depending on the condition of the vehicle being treated. For the initial treatment use a minimum of 3 to 4 ounces (90 to 120ml) for every 10 gallons (44 Liters) of fuel.


Can be used in:

  • Gasoline passenger cars
  • Farm machinery
  • Motorcycles and scooters
  • Excavators
  • Construction equipment
  • Other off-road applications
  • Light duty gasoline trucks
  • Pumps
  • Gas electrical generators
  • Gas marine engines
  • Railroad engines
  • Mining equipment
  • Two-cycle engines

SWRI Testing

Bi-Tron Fuel Conditioners tested by the top testing lab in the world!

Bi-Tron Fuel Conditioners were tested by Southwest Research Institute in a Society of Automotive Engineers (SAE) and The Maintenance Council of American Trucking Association specified protocol (SAE 11321 Joint TMC/SAE Fuel Consumption Test Procedure Type II) road test and proved that even when only used on it’s own Bi-Tron Fuel Conditioners deliver fuel efficiency improvements!

Southwest Research Institute

Southwest Research Institute (SwRI) is an independent, nonprofit applied research and development organization. The staff of more than 3,000 specializes in the creation and transfer of technology in engineering and the physical sciences. Southwest Research Institute has 100 major facilities with more than 2 million square feet of laboratories, workshops, test facilities, and offices.

The Testing

Bi-Tron Fuel Conditioners showed fuel economy improvement at a treatment ratio of only 30ml (1oz) per 50L (13 gallons) of fuel in a fully controlled lab road test.

The Fuel Conditioner test procedure followed was SAE 11321 Joint TMC/SAE Fuel Consumption Test Procedure Type II. This recommended practice provides a standard test procedure for comparing the in-service fuel consumption of one or more vehicles operating under two conditions. An unchanging control vehicle is run in tandem with the test vehicle(s) to provide reference fuel consumption data. The result of a test using this procedure is the percentage difference in fuel consumption of one vehicle in two different test conditions.

Economy Improvement

In the SAE specified road test conditions Bi-Tron Fuel Conditioners delivered savings that not only recovered the cost of the product at RETAIL price but delivered net positive savings up to double the cost of the product!

Even with the fantastic test results Bi-Tron, cannot guarantee specific percentage savings as each application is different. Everything from fuel type, engine size, tire pressure to operator driving style makes a difference in the end result. However, you can guarantee net savings for your customers or their money back, NO QUESTIONS ASKED. Simply inform the interested person that the Bi-Tron product is successfully lab tested according to SAE test specification and discuss their goals to design a test for their particular application.

Further treating the engine oil and transmission fluid with Bi-Tron Engine Treatment and Bi-Tron Powertrain Formulation respectively will deliver amazing results in any application.

“Where do I buy Bi-Tron?”

Click on Buy Now above or visit any of the Bi-Tron websites. We ship directly to your door. Direct your customers or interested friends and family members to the Shop or Buy Now links on your website:


“I own two D9H Caterpillar bulldozers. I added Bi-Tron Gas Conditioner to them. After 90 hours of work, I am saving 15 litres of gas per hour per machine, whilst pulling re-growth timber. Starting the dozers has been noticeably easier, and I have noticed a significant reduction of black smoke emission and an increase in power.

I have since added Bi-Tron Powertrain Treatment to the transmission, final drives and hydraulics. After 60 hours of operation, I have noticed that the transmissions are running cooler and quieter, and both machines perform under a heavy load a lot better. The final drives and hydraulics are both running cooler.

I have just begun to use Bi-Tron Engine Treatment in the engines. I have added Bi-Tron Fuel Conditioners to my 140G Caterpillar Grader. Already the black smoke has noticeably reduced and it has much greater power.

I am very happy with the range of Bi-Tron products, and recommend Bi-Tron to everyone.”

“On a recent trip I filled up the tank before we left. I usually add 4oz of Bi-Tron per fill-up. We drive a gas guzzling V8 SUV and always watch, and are appalled at, the cost of running it. After we arrived my husband filled up the car. It took 69.279 Liters to fill. This time he added the Bi-Tron. He’s a bit more liberal with the use of the Gas Conditioner than I am; he added the rest of the bottle, about 6oz.

We drove back the same route, in worse traffic, and gassed up once we returned. The return trip used 62.577 Liters. By my math that’s 6.702 Liters less gasoline and taking into account the cost that saved me exactly $6.

Using a couple of ounces more than the recommended amount cost $3 and saved me an additional $6! I’m already getting significant savings using the products both in mileage (about 18%) and through not using premium gas as my manufacturer would have me do. Using regular gas saves me about $9 each time I fill-up! I get better mileage and performance with regular gas plus Bi-Tron.

The product was already more than paying for itself but more really is better!

Do you think I’ll keep using a higher dose of gas conditioner?”

K. Reuter

“I have been using the Bi-Tron Gas Conditioner for just over two months now and I can’t tell you how pleased I am with the performance of my vehicle. The increase in mileage per liter was gradual at first and has now reached an increase of 11 km per liter and that is in city driving. We have reached the conclusion that we will be using Bi-Tron in all of our vehicles. Now lets get to the product I am very excited about, the Bi-Tron Engine Treatment. I used to get an oil change every 3,000 km, now we can go 6,000 km between changes and the oil is still clean. The best part about this product is that the engine runs so much cooler thereby reducing friction and wear and keeping the costs of repair to a minimum. We really like saving money. We recommend Bi-Tron for any vehicle regardless of its age and you can bet I will recommend these products to my friends.”

Doug M.

“On a trip from Mission to Oyama, about 350km, in my 2000 Ford F350 Superduty crew cab, 4X4, 8′ box, powered by a V10, traveling via the Coquihalla I went up snow shed hill at 130 km, I still had lots of throttle left, and averaged 115 -118 km/h all the way. When I converted all the figures over I had made the trip at 16.8 miles to the gallon! Huge improvement!”

Jeff B.

“My friends were getting 23 miles per gallon. After I “Bi-Tronized” their vehicle they were receiving 28 miles per gallon.”

Tuula R.

“Our car, an Acura 3.2 CL, now runs on regular gas instead of premium and gets 75-80 km more mileage per tank. Which is approximately 20%!”

Dale F.

“I bought some product and put it into my 1979 Volvo with 500,000 miles on it and now it runs like new. On top of that when using all the products with the Fuel Conditioner I am saving 25% on fuel using regular gas. I’m sold on Bi-Tron!”

Chris C.

“I used to drive a car that only took premium fuel. I tried Bi-Tron’s Fuel Conditioner with regular fuel. Immediately with the first use of Bi-Tron I was already saving 10 cents a liter!”

Bob F.

“Prior to using Bi-Tron’s products I got 500km per tank of gas. After using the products I was reaching 600km per tank. Now I don’t have to visit the gas station as much!”

Patrick P.

“I would like you to know that my experience with using Bi-Tron has been totally positive. I first installed Bi-Tron Fuel Conditioner just before a trip from Kelowna to Vancouver [400km]. I monitored my car’s performance on the way to Vancouver, but didn’t really notice any difference. On the way back, however, it was very obvious that the car was running more smoothly. As I was driving up the Coquihalla Highway, I noticed that the car had not downshifted. This is unheard of for this car! I actually made it all the way to the summit without having the car downshift.

I have kept track of my mileage for the month that I have been using Bi-Tron. My miles per tankful has increased by 19.5%. When I did the math, I found that my saving, after deducting the cost of the Fuel Conditioner was $62.00 in one month. This works out to a saving of $744.00 per year. I actually anticipate that my savings will be greater than this because I am now using the Bi-Tron Engine Treatment as well.

My car is a 2003 Toyota Corolla.

Al M.

“We were getting 220 to 225 miles to 10 gallons or 44 liters of fuel. We noticed an immediate improvement in the cars performance but what has really got my attention is that we are now getting 275 to 290 miles on the same amount of fuel. This means that every fifth tank of fuel is FREE!”

Duane A.


1. How much Gas Conditioner should I put in a large tank?

The instructions call for 1-2oz for every 10 gallons (30-60 ml for every 44 Liters). For example, a 100 gallon tank would need 10-20oz depending on the condition of the vehicle being treated. For the initial treatment use a minimum of 3-4oz (90-120ml) for every 10 gallons (44 Liters).

2. Will Bi-Tron void my manufacturer’s warranty?

No, absolutely not. Your new vehicle warranty actually covers the quality of material and workmanship that went into assembling your vehicle. Protecting the moving metal parts in your vehicle with a protective lubricating layer cannot void that warranty.

3. How can the Bi-Tron Gas Conditioner help my vehicle?

New fuel systems build up deposits rapidly, often within several thousand miles. Bi-Tron Gas Conditioner is designed to treat the entire fuel system. This unique formula will clean fuel injectors, cylinder heads, piston tops and intake ports.

4. Will the Bi-Tron Gas Conditioner harm the oxygen sensors in the vehicle?

No, Bi-Tron Gas Conditioner is compatible with all oxygen sensors and catalytic converters.

5. Am I really helping the environment?

The net result of using Bi-Tron Gas Conditioner is that the fuel ignites and burns faster, hotter and more completely, so that more of the energy is released from the fuel. In terms of emissions this means that the carbon monoxide and hydrocarbon levels will most likely be dramatically reduced.

6. Can Bi-Tron Gas Conditioner be used in marine applications?

Yes, absolutely. Bi-Tron Gas Conditioner will actually help prevent moisture accumulation.

7. Why aren’t they in stores?

There are so many products on the supermarket shelves that this product would simply become another item, and you would never learn about what they can actually do for the environment and your second largest investment.