Bi-Tron Powertrain Formulation

Protects and improves efficiency!

Designed to reduce friction in extreme pressure situations, contributing to a reduction in wear and operating temperatures.

- Smoother, faster shifting
- Reduces noise and vibration
- Reduces friction, wear, operating temperatures
- Maximizes drive-train power and efficiency
- Protects steering box, transmission, and differential
- Greater fuel efficiency due to reduced friction
- Improved engine response

Natureline's Bi-Tron Powertrain and Gear Formulation is a scientifically blended formula containing the unique Bi-Tron metal treatment technology, which coats and protects metal with a layer of polarized oil molecules.

Bi-Tron Powertrain and Gear Formulation is engineered to be compatible with gear oils such as Automatic Transmission Fluid, Mercon and Dexron as well as hydraulic fluids. It is designed to reduce friction in extreme pressure situations, contributing to a reduction in wear and operating temperatures. It works in the same manner as all the Bi-Tron lubricants, coating metal with a protective layer of oil molecules. It will actually be attracted into areas of high wear because the extra friction creates extra heat, whereas a conventional lubricant will move away from that area. The reduction in friction leads to less waste of energy, energy that would be lost in the form of heat and noise. This means that more energy is free to pass through the drive train providing an improvement in output at the wheels.

Bi-Tron Powertrain and Gear Formulation is one of the more versatile products in the Bi-Tron division. It's uniquely engineered pure hydrocarbon base makes it completely compatible with a wide range of different gear and bearing oils as well as hydraulic and cutting fluids.

Use 8 ounces (236ml) of Bi-Tron Powertrain and Gear Formulation for every 1 gallon (4 Liters) of lubricant being treated. This is 5% to 6% Bi-Tron Powertrain and Gear Formulation based on your lubricant reservoir capacity. For example, a 32 gallon transmission case would need 256 ounces (7.6 Liters or 2 gallons) of Bi-Tron Powertrain and Gear Formulation depending on the condition of the vehicle/equipment being treated.

Bi-Tron Powertrain and Gear Formulation as an additive to transmission fluids, hydraulic oils, compressor oils etc., contributes significantly to reduction in wear, amazing reduction in noise level and operating temperature. Bi-Tron Powertrain and Gear Formulation is an excellent dispersant and moisture repellent. Its performance is not affected by moisture dirt and abrasive dust.

  • Automatic Transmissions: add 6%
  • Manual Transmission: add 10%
  • Hydraulic Systems: add 6%
  • Gear Boxes: add 10%
  • Bearing Journals: add 10%

Can be used in:

  • Transmission fluids
  • Hydraulic oils
  • Compressor oils
  • Refrigeration oils
  • Arbor and form oils
  • Way oils
  • CP oils
  • Gear lubes
  • Cutting oils
  • Automatic andmanual transmissions
  • Differentials and gearboxes
  • Bearings and bearing journals
  • Power steering units
  • Pumps
  • Air compressors
  • Cooling systems
  • Hydraulic power systems in heavy duty off-road equipment and farming machinery
  • Mining and smelter equipment
  • Railroad equipment
  • Oil and water wells
  • Drilling equipment
  • Machine shop equipment: grinding, drilling, milling, cutting etc.
  • Cotton pickers
  • Air tools
  • Diesel and gasoline passenger cars

Benefits:

  • Extended maintenance intervals
  • Lower fuel and oil consumption
  • Increased performance and efficiency
  • Extends life of equipment and parts
  • Lower operating temperature and noise level
  • Eliminates much of the wear
  • Protection in a wider range of temperatures
  • Temporary protection in case of loss of oil, or coolant
For the initial treatment only use a minimum of 8% to 10% Bi-Tron Powertrain and Gear Formulation [16 ounces (472ml) for every 1 gallon (4 Liters) of base lubricant].
A single 8oz bottle of Bi-Tron Powertrain and Gear Formulation will treat one small vehicle transmission.

Your cost per 1 quart/1L treated = $4.68

Our customers report improved performance and efficiency regularly. Because every vehicle is different in terms of maintenance, age, driver's driving style and the environment in which it is driven we cannot guarantee individual results. We do offer a 100% Retail Customer Satisfaction Guarantee that makes your Bi-Tron test risk free. Contact us for details.

You can save even more by buying at discounted prices by becoming a Preferred Customer!

Steel Casting Company

"I was a doubtful when I heard about Bi-Tron, but much to my amazement what they said turned out to be true. That is a rare occurrence when so many are selling products that absolutely do not work.

I am now reporting some of the fantastic results that I have observed in testing this product in our industry. My company is enjoying cost reductions in many areas. Some of the reductions are in annual power consumption, reducing our power bill by an estimated $28,000.00. A cost reduction in maintenance of our equipment due to less friction and more free horsepower from a far better and superior lubricant. A good safe estimate in labor parts and cost of breakdowns would be $37,500.00. This cost is 15% of my assigned maintenance annual cost for repair of equipment.

Some of the tests we have performed on the Bi-Tron product have been measured through amperage readings (before and after). The readings were taken on transmissions, gear reduction, mulling operations, overhead cranes, hoisting equipment, blast cleaning equipment, melting furnace, dust collector fans, material handling equipment, bearings of all types (roller, needle, sleeve and pour babbit). I have even tested Bi-Tron for drilling of steel and much to my amazement; the amount of productivity out of a single drill bit skyrocketed.

I invite you to put Bi-Tron to the test. It will be to your liking, a product that actually works and excels. Wouldn't that be a change?

The industry that we are putting Bi-Tron in is one of the most rugged in our nation, the foundry industry. This industry is tremendously hot, exasperatingly dirty, gritty, and harmful to equipment. Bi-Tron works here, so it will work anywhere. The Bi-Tron product has been tested in actual production, and it works!"

DH9 Caterpillar

"I own two D9H Caterpillar bulldozers. I added Bi-Tron Fuel Conditioner to them. After 90 hours of work, I am saving 15 litres of diesel per hour per machine, whilst pulling re-growth timber. Starting the dozers has been noticeably easier, and I have noticed a significant reduction of black smoke emission and an increase in power.

I have since added Bi-Tron Powertrain Treatment to the transmission, final drives and hydraulics. After 60 hours of operation, I have noticed that the transmissions are running cooler and quieter, and both machines perform under a heavy load a lot better. The final drives and hydraulics are both running cooler.

I have just begun to use Bi-Tron Engine Treatment in the engines. I have added Bi-Tron Fuel Conditioner to my 140G Caterpillar Grader. Already the black smoke has noticeably reduced and it has much greater power.

I am very happy with the range of Bi-Tron products, and recommend Bi-Tron to everyone."

Drag Line

Before treating the winch motor and the hydraulic system with Bi-Tron Powertrain Formulation temperatures were taken with an electronic gauge, which is extremely accurate. It shows that by using Bi-Tron the client achieved reduced operating temperatures and wear. That is, heat will cause the metal to expand and so increase the level of friction and wear, which will in turn, contribute to the heat and further expanding of the metal creating more friction, and so on.

The reduction in temperature has a direct positive impact on the efficiency of the equipment and the amount of maintenance that will have to be peformed over time.

Before Bi-Tron After Bi-Tron % Change
Winch Motor 71ºC 51ºC - 28%
Hydraulic Pump 66ºC 44ºC - 33%

"I have never written a letter promoting or recommending a product of any kind before but in this particular instance I felt I had to. Let me tell you the story.

My 1991 Ford pickup 4x4 was having trouble getting from A to B due to transmission problems. It became very temperamental, just like a lazy teenager. Ask it to do something and then wait until it feels like it to move.

Well I was at my friend's place one day and I told him I might not be able to back out of his yard.

He asked me if it was okay if we tried some Bi-Tron [Powertrain Formulation] product and see if it would help the transmission. Well within a few kilometers it was working like a young adult and then a few more kilometers it had all its life back. I know it sounds unbelievable but this stuff really works and not only that I put some engine treatment in the motor and now the only complaint I have is that the fan belts make more noise than the rest of the engine . Since this now we have done both differentials the transfer case and the power steering. This truck is running awesome and I don't see where I'm going to have to pull the transmission. Thank you Bi-Tron!

Also, if this isn't enough, I tried the Bi-Tron Penetrating Lubricant on a pair of garden shears that I thought were destined for the landfill . They were rusted and seized up so bad they were immobile. Well these shears are back in service as good as new. More money saved! I'm now a firm believer in the Bi-Tron products and I would recommend that everyone be using them.

We have since Bi-Tronized my wife's car as well from one end to the other.

Well I guess the moral of this story is if you want some products that you can trust and believe in Bi-Tron."

Doug L.

" On a trip from Mission to Oyama, about 350km, in my 2000 Ford F350 Superduty crew cab, 4X4, 8' box, powered by a V10, travelling via the Coquihalla I went up snow shed hill at 130 kms, I still had lots of throttle left, and averaged 115 -118 kmh all the way. When I converted all the figures over I had made the trip at 16.8 miles to the gallon! Huge improvement!"

Jeff B.

"My friends were getting 23 miles per gallon. After I "Bi-Tronized" their vehicle they were receiving 28 miles per gallon."

Tuula R.

" Our car, an Acura 3.2 CL, now runs on regular gas instead of premium and gets 75-80 km more mileage per tank. Which is approximately 20%!"

Dale F.

"I bought some product and put it into my 1979 Volvo with 500,000 miles on it and now it runs like new. On top of that when using all the products with the Fuel Conditioner I am saving 25% on fuel using regular gas. I'm sold on Bi-Tron!"

Chris C.

"A retail customer of mine was driving when his oil pick up tube fell off inside the oil pan. He continued on (round trip of approx. 40km) with absolutely no oil circulation. He later found out the cause from his mechanic and now has come to the realization that the only thing that saved his engine was Bi-Tron's products."

Steve E.

"Bi-Tron's Pen Lube just saved us an $1100 repair. My husband Tim was blowing fuses in the truck constantly. He used the Pen Lube once on all the connections and has not had a single problem since. When quoting the problem prior to using Bi-Tron we were told that it would cost $1100."

Jo-Anne M.

"My 1986 Mazda pick up truck was having a lot of problems with the manual steering me and my wife were even having difficulty parking because it was so stiff. I was introduced to Bi-Tron's Powertrain Formulation and I added 2oz to my Mazda and the problem was fixed. I couldn't believe it I was about to go and buy a new car with power steering.

30% more mileage on Mazda and huge difference in driving. Quieter, it's like a new car."

Bruce N.

Frequently Asked Questions

1. Can I use Bi-Tron Powertrain & Gear Formulation in a manual transmission?

Yes. At 6% mixed with your gear oil. It often results in much smoother shifting.

2. Will Bi-Tron Powertrain & Gear Formulation void my manufacturer's warranty?

No, absolutely not. Your new vehicle warranty actually covers the quality of material and workmanship that went into assembling your vehicle. Protecting the moving metal parts in your vehicle with a protective lubricating layer cannot void that warranty.

3. Will Powertrain & Gear Formulation stop my automatic transmission from slipping?

No, Bi-Tron Powertrain & Gear Formulation is designed to help prevent seal leaks, enhance fluid performance and protect against oxidation of the fluid. Bi-Tron Powertrain & Gear Formulation will not correct any pre-existing mechanical problems.

4. How often should I add Bi-Tron Powertrain & Gear Formulation?

Add more each time you change the transmission or gear or lubricating fluid in your application. Use at 5% to 6% of the lubricant being treated.

5. Can Bi-Tron Powertrain & Gear Formulation be used in any differential?

Yes, Bi-Tron Powertrain & Gear Formulation can be used in vehicles that have posi-traction or limited slip applications.

6. Can the Bi-Tron Powertrain & Gear Formulation be used in the lower end unit for marine applications?

Yes, this product can be used in outboard/inboard applications or where hypoid gear oil is used. (Always check the owner's manual for applications).

7. Does Bi-Tron Powertrain & Gear Formulation work in hydraulic applications?

Absolutely. Heat is the enemy in most hydraulic systems and Bi-Tron's Powertrain product actually goes to the hot spots. Use at 6% to the hydraulic fluid.

8. Will Bi-Tron Powertrain & Gear Formulation fix pre-existing problems?

No, Bi-Tron Powertrain & Gear Formulation is designed to protect against friction and heat. Bi-Tron Powertrain & Gear Formulation cannot be used to repair parts that are at the failing point or any pre-existing mechanical problems.

9. After Bi-Tron Powertrain & Gear Formulation is installed do I still need to follow manufacturer's maintenance specifications?

Yes, Bi-Tron is not a replacement for regular scheduled maintenance. Bi-Tron may extend the working life of your base lubricant but manufacturers may void warranties unless regular service schedules are maintained.

10. Can Bi-Tron Powertrain & Gear Formulation damage seals?

No, far from it. Bi-Tron can actually rejuvenate the seals to an extent. It will not, however, repair damaged seals. It is not a detergent but does have detergent like properties. It may remove build up that has been deposited around seals allowing them to reseat. There is no way Bi-Tron can cause a seal to fail.

11. What's in it?

Revealing intricate details of this formula would be unwise from a business competition viewpoint. Are you aware of what is in the oil products you presently use for your vehicles? We can assure you that Bi-Tron uses only the highest quality, tested and proven technology and ingredients. Suffice to say there is no part of our product that can cause any harm. They contain no solids, no PTFE, no lead, zinc, molybdenum or copper. No solids of any kind. Nothing to clog up, plug or damage anything. It is non acidic, non caustic, well balanced, thoroughly researched, time tested and proven, with over a decade of satisfied users worldwide.

12. How does it work?

The primary technology behind Bi-Tron seeks out and bonds to metal creating a lubricant layer. Any build up existing on the metal Bi-Tron is seeking out is removed. Bi-Tron is superior to any lubricant you will find on the market. If you haven't tried it yet you should!

13. What if I don't like it and want my money back?

Natureline gives a 100% money back guarantee on all retail purchases. If you are genuinely unhappy with the results and you have followed the instructions properly the distributor from whom you purchased the product will return your purchase price. We will always maintain a money back guarantee because this product works.